8960DEC Instruction Manual
27
Configuration
Timing Adjustments (Frame Sync Option)
The Timing display shown in
optional 8900FSS Frame Sync submodule is installed on the 8960DEC
module. It provides lock source selection and fine phase adjustments along
with freeze controls for the input video. Refer to the Configuration
Summary in
for a summary of what video lines are
affected by each control, all parameters, step sizes, and default values.
Use the Timing display to set the following parameters:
•
Choose a Lock Source from
Reference
input or
Video In
input.
•
Adjust
H Phase
in nanoseconds and
V Phase
adjustment in lines.
•
Set
Freeze Recognition
to
Manual
or
Auto
.
Selecting
Auto
stores the last field
in the Frame Synchronizer to use if the input video is lost or corrupted.
•
Set the
Freeze Mode
to
Frame
or
Field
.
•
Set the
Freeze Field
to
Field 1
or
Field 2
.
•
Set the
Freeze Signal
to
Last Field
or
Black
. This will determine the freeze
signal when a freeze is activated in either
Auto
or
Manual
mode.
•
To perform a manual freeze, click the
Freeze
button at lower left.
Figure 11. Timing Display
Use
this
link
