3-109
CHAPTER 3 Settings and Measurement
(5)-4 FTP/WEB server settings
Set the FTP server/WEB server as this device.
(1)
(5)
(2)
(6)
(3)
(7)
(4)
(8)
Selection item
Description
FTP Client
(1) FTP Server
Enter the domain name or IP address of the FTP server. (Up to 127 characters)
(2) User Name
Enter the user name of the FTP account. (Up to 31 characters)
(3) Password
Enter the password of the FTP account. (Up to 31 characters)
(4) Port Number
Enter the port number of a port to be used for FTP. It is normally 21. (0 to 65535)
(5) PASV Mode
Make the passive mode setting.
ON : Should be set for communication with an external FTP server in a firewall environment.
OFF : Should be set for communication with an FTP server in a normal network environment.
(6) FTP Server
Connection
Test
Press right key to execute (Performs connection test to the FTP server.)
When the connection test is performed, a message is displayed.If connection cannot be
established, check the settings and perform the connection test again.
* If the connection test is passed, the following message is displayed.
FTP server
(7) Port number
Set port number of the FTP server installed in this device. (0 to 65535))
WEB server
(8) WAB number Set port number of the WEB server installed in this device. (0 to 65535)
(5)-5 Mail settings
Enter the settings for emails on the device.
When mail send setting is complete various notification setting (Alarm, low battery, drive low capacity (only
during capturing)) is sent. Also, when periodic notification is set, it is sent according to the set time.
(1)
(2)
(1) Mail send settings
Setting
Description
Outgoing mail
settings
Destination
Settings
TO
Set the destination (address) of the E-mail.
Enter the string of up to 63 characters.
CC1 to CC3
Set the destination of the E-mail (broadcast 1 to 3).
Enter the string of up to 63 characters.
Subject
Set the subject of the E-mail.
Enter the string of up to 63 characters.
Notification
settings
Alarm
Set the E-mail send when an alarm occurs.
Off, On
Low battery
Set the E-mail send when the internal battery lowers.
Off, On
Drive free space Set the E-mail send when the drive free capacity during recording is
low.
Off, On
Periodic
notifications
Set the periodic notification E-mail send.
Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours, Specified time
* You can set the specified time to the hours : minutes : seconds.