CS1000EV/1100EV
B – 1
APPENDIX B. STANDARD SPECIFICATIONS
APPENDIX B. STANDARD SPECIFICATIONS
Item
CS1000EV
Document size
ANSI E to ISO A4 (all sizes centered)
Effective scanning area
Width : 914 mm (max. 1000 mm)
Length : 1188 mm (capable of long-length scanning up to
approximately 4 m)
*
1
Document thickness
1.5 mm or less (including the carrier sheet)
*
2
Optical resolution
600 dpi
Interpolated resolution
Main scanning direction : 200 dpi, 300 dpi, 400 dpi, 600 dpi
Secondary scanning direction : 200 dpi, 300 dpi, 400 dpi, 600 dpi,
800 dpi
Main scanning system
Contact image sensor system
Sub scanning system
Document travel (sheet through) system
Scanning speed
*
3
Monochrome: Approx. 1.3 ms/line
3.8 inch/s at 200 dpi
1.9 inch/s at 400 dpi
1.26 inch/s at 600 dpi
Color: Approx. 3.9 ms/line
1.28 inch/s at 200 dpi
0.64 inch/s at 400 dpi
0.42 inch/s at 600 dpi
Scanning precision
*
4
±
0.1%,
±
5 pixels
Gradation
Monochrome: Bilevel, intermediate tones (dithering, error diffusion)
Gray: 256 shades
Color: 256 colors
Light source
LED (RGB)
Interface
SCSI-2
Rated power supply
100 to 120/200 to 240 VAC
±
10%, 50/60 Hz
Operating environment
Temperature: 10
°
C to 35
°
C, Humidity: 35% to 80% RH (no
condensation)
Power consumption
115 VA or less
External dimensions
1205
×
1020
×
600 mm (W
×
H
×
D) (including stand)
(approx.)
Weight
Approx. 48 kg (including stand)
*
1
Documents up to approximately 4 m in length can be scanned. (Mechanical restriction)
For long-length documents, the document length that can be scanned is limited by the
available memory (hard disk or other data storage device) of the host computer to which it is
connected, and also by the grade of the medium being scanned.
*
2
Carrier sheet thickness: 0.2 mm
*
3
Excluding data-transfer time
*
4
Notes on scanning precision
Scanning precision may vary slightly depending on the grade and thickness of the medium
being scanned, and on the operating conditions. The precision figures above were measured
under the operating conditions described below.
• Document hold-down unit
: Standard unit
• Test chart used
: Mylar sheet (thickness: 55
µ
m)
• Guaranteed precision conditions
: Temperature 20
±
3
°
C; humidity: 60%
±
10% RH
• Guaranteed scanning precision range : 1188 mm
×
841 mm
