5 – 4
CS1000EV/1100EV
5. DAILY MAINTENANCE
5.3 Cleaning the Document Hold-Down Unit
Scanning may be affected if the underside of the document hold-down unit becomes
scratched or dirty. It must be cleaned when necessary.
(1)
Turn off the scanner.
(2)
Remove the document hold-down unit as described in Section 4.5, “Removing the
Document Hold-Down Unit.”
(3)
Wipe clean the underside of the document hold-down unit (see below) using a soft
cloth that has been soaked in water or diluted neutral detergent and thoroughly wrung
out.
Underside
(4)
Wipe the document hold-down unit once again using a soft, dry cloth (remove all
moisture).
(5)
Reattach the document hold-down unit as described in Section 4.6, “Attaching the
Document Hold-Down Unit.”
