Graphite 59G678, Manual

Page: 12 / 104

12
TRANSLATION O F THE ORIGINAL INSTRUCTIONS
ELECTRIC PLANER
59G678
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
DETAILED SA F ETY REGULATIONS
SPECIAL CONDITIONS REGARDING SAFETY OF ELECTRIC PLANER OPERATION
Before connecting the planer to mains socket make sure the supply voltage matches the voltage on the
●
rating plate of the tool.
Connect the planer only to electrical system equipped with residual current circuit breaker that will cut
●
the power off when earth leakage current exceeds 30 mA in less than 30 ms.
Use only sharp cutting parts.
●
After the work has been finished and before putting the planer away wait until rotating parts stop
●
completely.
Use hearing protection measures when working with planer.
●
When using the planer hold it firmly with both hands.
●
Power cord of the planer must be on the safe side, where there is no danger of accidental damage by
●
operating power tool.
Before starting operation ensure there are no metal objects, such as nails or screws, in the processed
●
material.
Do not put fingers into dust outlet hole. Clean the outlet with a piece of wood.
●
Fix processed material to prevent it from slipping.
●
CAUTION! This device is designed to oper a te indoors.
The design is a ssu m ed to be s a fe, protection m e a sures a nd a ddition a l s a fety syste m s a re used,
nevertheless there is a lw a ys a s ma ll risk of oper a tion a l injuries.
CONSTRUCTION AND USE
Planer is a hand-held power tool with insulation class II. The tool is driven by single-phase commutator
motor. Planer is designed for processing wooden surfaces.
Range of use covers repair and building works, woodworking and any work from the scope of individual,
amateur activities (tinkering).
Use the power tool a ccording to the ma nuf a cturer’s instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
Knob for planing depth adjustment
1.
Switch
2.
Switch lock button
3.
Drive belt cover
4.
Dust extraction outlet
5.
Front footplate
6.
Planing depth scale
7.
Parallel guide position locking wheel
8.
Parallel guide
9.
Support
10.
Support locking knob
11.
Deep planing guide
12.
Locking knob for deep planing guide
13.
Guide handle
14.
Fixing screws
15.