GRAPHITE PRO 59GP402, Instruction Manual

Page: 20 / 148

20
Counter-clockwise rotation
– set the switch
(
5
) to the extreme right position.
* In certain cases position of the switch related to
rotation may be different than specified. Please refer to
graphic signs located on the switch or tool body.
Safe position of the direction selector switch
(
5
) is in the middle, it prevents accidental
starting of the power tool.
•
When the switch is in this position, the
power tool cannot be started.
•
Use this position of the switch to change
bits.
•
Before starting the tool make sure the
position of the direction selector switch (
5
)
is correct.
Do not change direction of rotation when the
spindle of the power tool is rotating.
Long lasting operation at low rotational
speed of the spindle may cause motor
overheating. Provide regular breaks
during operation or let the tool operate
at maximum speed with no load for
approximately 3 minutes.
HOLDER
The power tool provides convenient holder (
6
)
that allows to e.g. hang the tool on a tool belt
when working at heights.
OPERATION AND MAINTENANCE
MAINTENANCE AND STORAGE
•
Cleaning the device after each use is
recommended.
•
Do not use water or any other liquid for
cleaning.
•
Clean the power tool, battery and charger
with a dry cloth or blow through with
compressed air at low pressure.
•
Do not use any cleaning agents or solvents,
they may damage plastic parts.
•
Clean ventilation holes in the motor casing
regularly to prevent device overheating.
•
In case of excessive commutator sparking,
have the technical condition of carbon
brushes of the motor checked by a qualified
person.
•
Store the power tool and its equipment in a
dry place, beyond reach of children.
All defects should be repaired by service
workshop authorized by the manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
Impact Driver
Parameter Value
Battery voltage 18V DC
Battery type Li-Ion
Battery capacity 2500 mAh
USB Power Bank 5 V DC (1A)
Idle rotational speed 2800 min
-1
Quick-release chuck 6,35 mm (¼ ‘’)
Max. torque 165 Nm
Protection class III
Weight 1,4 kg
Year of production 2017
Charger
Parameter Value
Supply voltage 230 V AC
Power supply frequency 50 Hz
Charging voltage 21 V DC
Max. charging current 2500 mA
Battery charging time 1 h
Protection class II
Weight 0,58kg
Year of production 2017
NOISE LEVEL AND VIBRATION PARAMETERS
Noise and vibration information
Parameters of produced noise level, such as
sound pressure level Lp
A
and sound power
level Lw
A
with measurement uncertainty K are