33784 V1.0
Yoyolog User Guide
www.grantinstruments.com
Page 24
YoyoView automatically assigns the
minimum
and
maximum
values of the sensor range.
This can be altered if required.
In order to set engineering units for the sensor, se-
lect
Change to new Unit
in the section
Sensor-
Range
.
Further settings can be entered. The above example shows the values for a sensor with
a linear range of 0…50m/s = to 0…1V.
In this example the following has been entered:
Slot rename
: Ductsensor8455
New Description
: Velocity
New Unit
: m/s
New Minimum
: 0
New Maximum
: 50
Once the correct settings have been entered for the sensor click on the
OK
button.
As per the default, this new range will automatically be activated and logged when the
logger is started. If the engineering units are no longer required they can be deselected
at
Logger Setup, General, More values
, further information on this can be found in
chapter 7.4.
