33784 V1.0
Yoyolog User Guide
www.grantinstruments.com
Page 20
Active Stop procedure
Stopping the logger works the same way as described for the active start.
After shaking the logger five times it will indicate a successful logging stop by
flickering in red colour.
The “active start” and “active stop” is intentionally a multiple step process, to make sure
the logger is not started or stopped accidently (for example during transportation).
If it appears, that the shaking procedure does not end up in the LED flashing in multicol-
ours (or red colours), the logger has not been started (or stopped) properly.
In this case, start again from Step 1 as described above.
Important:
When the logger is started (either by active start or by normal start procedure) it will
always overwrite the complete memory and data that hasn’t been downloaded earlier is
lost.
