ecocool 150R
Page 21
Operating Manual
www.grantinstruments.com
1. Rotate the dial until the
preset
icon is
highlighted, press the
S
button.
2. Rotate the dial to select the desired preset 1, 2
or 3, press
S
to run the preset.
The preset will automatically start as soon as S
is pressed.
If no key is pressed for 10 seconds or if F is
pressed the preset icon is no longer active and
will remain at its original value.
Preset temperatures and set temperatures are limited to the liquid selection. The control
settable range is between -30°C and 150°C.
5.2.4 Running a countdown timer
The countdown timer on the heating circulator can be set in the range of 1 minute to 99
hours. The countdown timer will sound a buzzer at the end of a countdown period.
1. Rotate the dial until the
countdown timer
icon is
highlighted, press the
S
button.
The countdown timer will display the last
countdown time set.
If no key is pressed for 10 seconds or if F is
pressed the countdown timer setting is no longer
active and will remain at its original value.
2. Rotate the dial to set the desired countdown
time, press
S
to store.
The countdown timer will begin counting down
from the set time. At the end of the countdown
timer period a buzzer will sound. This can be
cancelled by pressing F or S.
To cancel an active countdown timer:
1. Rotate the dial until the
countdown timer
icon is highlighted, press the
S
button.
2. Press the
F
button to cancel the countdown timer.
The countdown timer is stopped.
5.2.5 Running a program
The heating circulator has the capability to run automatic temperature profiles called
programs. It has the capacity to store 1 program containing 30 individual
temperature/time segments. The program can only be configured and edited using Grant
Labwise
™ software. When a program is running icon access is limited to the standby
and program functions.
.
°c
.
°c
:
.
°c
.
°c
:
