Grant ecocool 100R, Operating Manual

Page: 3 / 36

ecocool 100R
Operating Manual Page 2
www.grantinstruments.com
Contents
Contents
2
1.0 Use of products 4
2.0 How to use this operating manual 4
3.0 Safety information 5
3.1 Safety compliance 5
3.2 Safety symbols 5
3.3 Safety warnings 5
4.0 Operating instructions 6
4.1 Unpacking instructions 6
4.2 Product description 7
4.2.1 Heating Circulator 7
4.2.2 Refrigerated bath 9
4.3 Installation 11
4.4 Rotating the heating circulator 11
4.5 Fitting the communications lead 12
4.6 Electrical supply 12
4.7 Recommended liquids 13
5.0 Operating procedures 14
5.1 Preparing the ecocool 100R for use 14
5.1.1 Liquid level 14
5.1.2 Tank lid 14
5.1.3 Setting the over-temperature thermostat 14
5.1.4 Using the heating circulator pump 15
5.1.5 Emptying the liquid tank 15
5.1.6 Setting up and switching on 16
5.1.7 Eco mode cooling 16
5.2 Using the equipment 17
5.2.1 Setting the control temperature 17
5.2.2 Selecting liquid type 17
5.2.3 Configuring a pre-set 17
5.2.4 Running a bath preset 18
5.2.5 Setting a countdown timer 18
5.2.6 Cancelling the timer 19
5.2.7 Setting a high temperature warning alarm 19
5.2.8 Controlling the external pump power 19
5.2.9 Selecting cooling mode 20
5.2.10 Completing a calibration 20
5.2.11 Restoring factory calibration settings 21
5.2.12 Adjusting display brightness 21
6.0 Technical specifications 22
6.1 Operating conditions 22
6.2 Electrical details 22
6.3 Performance 22
6.4 Storage and transportation 22
7.0 Technical Tips 23
7.1 Which water should you use in your equipment? 23
7.2 How to prevent rust in the equipment 23
7.3 How to prevent algae and bacteria? 24
8.0 Warranty information 25
9.0 Maintenance and service 25
9.1 Routine maintenance 25
9.2 Cleaning 25
9.3 Fuses 26