Operating Instructions for Tractor A-Frames
Type: GRANIT Index group 778
6
4.
Equipment description
4.1.
Scope of delivery
Tractor A-frame partly assembled
Documentation consisting of an operating instructions for filing with the operating
instructions of the carrier vehicle.
4.2.
Description and individual parts
ATTENTION: The parts in this chapter may only be replaced by a recognised
specialist. Incorrect handling can increase the risk of injury and damage to property.
Listing according to figure 1 and 2:
Item
Number Name
1
1
Base frame
2
1
Warning signs
3
1
Locking pawl
4
1
Spring cotter pin
5
1
Top link pin (depending on model)
6
2
Bottom link pin (depending on model)
7
1
Operating lever with attachment
8
3
Linch pins
9
1
Equipment A-frame (available separately for implements)
10
1
Eyelet for actuating cable
Table 2
Orders for spare parts and information on article numbers are available from authorised
GRANIT PARTS dealers.
5.
Handling the tractor A-frames
Before mounting the unit on the tractor and operating it, the following points must be checked
to ensure that the unit can be operated safely.
Before coupling the unit to the tractor, make sure that the coupling point is undamaged
and clean.
ATTENTION: Damage and contamination can impair the secure connection.
UNFALLGEFAHR!
Check the connecting materials for completeness and integrity.
ATTENTION: Only use the connecting materials supplied. If they are damaged,
replace them with original spare parts from Wilhelm Fricke SE. UNFALLGEFAHR!
Type conformity with the requirements in this manual.