Instruction
Manual
50700006
8
4.
Set the temperature unit fur the instrument
Press the Mode key for 2 seconds to switch the temperature measurement unit.
5.
Enable/disable Laser
Press key to enable or disable laser.
The instrument will display the symbol for laser
6.
Turn on or off UV
Press key to turn on or off UV (only PM6530C). Leak detection:
The Leakage of verhicle air conditioning and other high pressure systems can be detected
quickly by ultraviolet. Flourescent agent is injected into the air condition system, fluorescent
agent will with the refrigerant in the air-conditioning system in circulation, when the air
conditioning system has a leak, fluorescent agent will left leakage Fluorescence leakage
under theirradiation of ultraviolet light can emit fluorescence at, and then find the leak.
7.
Non-contact temperature measurement
Target the temperature measurement meter at an object and pull the trigger for a period to
carry out continuous measurement of temperature. After display becomes stable, release
the trigger to hold measurement result.
When the trigger is pressed, the instrument’s secondary display
panel will first show the set emissivity and then display the
measured maximum temperature.
