background image

 

1

CHAPTER 1 

Welcome to Wi-Fi Camera   

 

1.1 Introduction 

Nowadays, more and more people are aware of their personal, home and 
office security and are finding solution to protect themselves. With our 

Grand Wi-Fi Camera

, It provides you the ideal solution to operate with 

Internet Explorer web browser. 

Grand Wi-Fi Camera 

built-in a high-speed image and network processor and It 

is a powerful embedded device with many Internet services such as Email, FTP, 

DDNS, PPPoE, NTP, User Manager, and Image Control. The 

Grand Wi-Fi 

Camera 

includes a high quality CMOS sensor with 6 infrared LEDs

 

that

 

provide 

image in the dark. 

 

 

2

1.2 Product Features 

1. High Resolution Image Processor (

640*480:15fps, 320x240:30fps

) with 

built-in MJPEG encoder. 

2. Ethernet RJ-45,10/100 Base-T auto-sense. 
3. Remote view through the IE browser using an IP address 
4. infrared LEDs

 

to

 

provide images in the dark. 

5. Supports many valuable Internet services: 

Email

,

 FTP

,

 PPPoE

,

 Dynamic 

DNS

NTP service

User Management

, and 

Image Quality Control

6. USB 1.1 Interface, compatible with Microsoft 

MSN 

and

 NetMeeting

 

1.3  System and network environment   

1. LAN:

 

10Base-T Ethernet or 100Base TX Fast Ethernet 

2. More than one fixed IP address is recommended 
3. A 10/100Base-T switch HUB is required 
4. Microsoft Internet Explore 5.0 or above   
5. Pentium4 1.3GHz CPU or above 
6. 64MB RAM or above 
7. VGA card with 8MB Memory at 800x600 or above 
8. Windows 2000/XP is recommended 

Important

:

 A fixed IP address is not required to access camera from 

the Internet

.

 However if your IP address is dynamic, you need to ask 

your Internet Service Provider for the Dynamic DNS service. 

 
1.4 Package Contents 

1. Grand Wi-Fi Camera 
2. Scaffold 
3. Screw (for Reset & Default Key use) 
4. User’s Manual 
5. Driver CD (Surveillance software is optional) 
6. USB Cable 
7. RJ-45 Cable (crossover wire) 
8. 5V DC Adapter 

Summary of Contents for P362
























Reviews: