21
Chapter 4
Advance Configuration
This chapter introduces advanced configuration for the IP Camera.
4.1 Device administration Setup
Administration Setup
1. Administrator Password:
You can modify the Administrator’s login
password then click the
“Apply”
button to update.
Default User ID: root
Default User Password: admin
Caution:
Please remember your Administrator password. If you have
forgotten your administrator password, please refer to chapter5’s
FAQ.
4. MAC Address:
To modify the GRAND IP Camera II’s MAC address, type
a unique MAC address then click the
“Apply”
button to update the
setting. You should use the MAC address that is printed on the case.
22
5. Reset Device: Yes / No:
Reset your GRAND IP Camera II and restart
without lost any storage information. Please select
“Yes”
, and then click
the
“Apply”
button.
6. Factory Defaults: Yes / No:
Reset your GRAND IP Camera II and
restart with factory default information. All storage information will clear.
Please select
“Yes”
, and then click the
“Apply”
button. This is the same
as the Hardware factory reset.
7. Multiport Defaults: Yes / No:
Check
“Enable”
to allow you to configure
the broadband router from WAN side. To access the setting page from
external side, enter
“http://<WAN IP Address>: 8080”
in the web
browser
4.2 PPPoE Setup
IP Camera Setting – PPPoE Setup
1. PPPoE: Enable / Disable:
Click
“Enable”
to enable the PPPoE function.
You can then connect the IP Camera with an ADSL modem
