Grandstream Networks UCM6510, User Manual

Page: 349 / 483

P a g e | 348
UCM6510 IP PBX User Manual
Version 1.0.20.31
Figure 227: Dial By Name Group In Inbound Rule
Username Prompt Customization
Starting from fw 1.0.15.x, the Dial By Name feature can use the recorded name prompt of a user to
announce his/her name assigned to the dialed extension. If no name prompt greeting exists, the name will
be spelt out like in previous versions.
There are two ways to customize/set new username prompt for an extension:
Upload Username Prompt File from Web GUI
4. First, Users should have a pre-recorded file respecting the following format:

PCM encoded / 16 bits / 8000Hz mono.

In .GSM or .WAV format.

File size under 5M.

Filename must be set as the extension number. For example, the recorded file name 1000.wav
will be used for extension 1000.
5. Go under web GUI PBX Settings

Voice Prompt

Username Prompt and click on
button.
6. Select the recorded file to upload it and press Save and Apply Settings.

Click on to record again the username prompt.

Click on to play recorded username prompt.