Grandstream Networks LXP100, User Manual

Page: 23 / 61

FIRMWARE VERSION 1.0.5.23 LXP100 USER MANUAL Page 23 of 61
¾
During the conference, press HOLD key. The conference call will be split and the calls will be put
on hold separately with the LINE keys blinking in green;
¾
Select 1 LINE key and press to resume the 2-way conversation;
¾
If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is held/split;
•
End Conference .
¾
Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or
¾
Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
LXP100 supports Easy Conference Mode , which can be used combined with the traditional way to
establish the conference.
•
Initiate a conference call .
¾
Establish 1 call;
¾
Press CONF key and a new line will be brought up using the same account;
¾
Dial the number and press SEND key to establish the second call;
¾
Press CONF key or press the ConfCall softkey to establish the conference.
•
Split and Re-conference .
¾
During the conference, press HOLD key. The conference call will be split and both calls will be put
on hold separately with 2 LINE keys blinking in green;
¾
Select 1 LINE key and press to resume the 2-way conversation;
¾
If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is split.
•
Cancel Conference .
¾
If users decides not to conference after establishing the second call, press EndCall softkey instead
of the ConfCall softkey/CONF key;
¾
This will end the second call and the screen will show the first call on hold.
•
End Conference .
¾
Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or
¾
Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
Note:
•
The party that starts the conference call has to remain in the conference for its entire duration, you can
put the party on mute but it must remain in the conversation. Also, this is not applicable when the
feature "Transfer on Conference Hangup" is turned on.