FIRMWARE VERSION 1.0.5.23 LXP100 USER MANUAL
Page 20 of 61
make Quick IP Call, take the phone off hook first. Then dial #xxx where x is 0-9 and xxx<255. Press # or
SEND and a direct IP call to aaa.bbb.ccc.XXX will be completed. "aaa.bbb.ccc" is from the local IP address
regardless of subnet mask. The number #xx or #x are also valid. The leading 0 is not required (but it's OK).
For example:
•
192.168.0.2 calling 192.168.0.3 -- dial #3 followed by # or "SEND";
•
192.168.0.2 calling 192.168.0.23 -- dial #23 followed by # "SEND";
•
192.168.0.2 calling 192.168.0.123 -- dial #123 followed by # "SEND";
•
192.168.0.2: dial #3 and #03 and #003 results in the same call -- call 192.168.0.3.
Note:
•
The # will represent colon ":" in direct IP call rather than SEND key as in normal phone call;
•
If you have a SIP server configured, direct IP call still works. If you are using STUN, direct IP call will
also use STUN;
•
Configure the "User Random Port" to "No" when completing direct IP calls.
ANSWERING
PHONE
CALLS
RECEIVING
CALLS
•
Single incoming call
. Phone rings with selected ring tone. The corresponding LINE key will flash in
red. Answer call by taking handset off hook, or using Speaker/Headset, or pressing the flashing LINE
key;
•
Multiple incoming calls
. When another call comes in while having an active call, the phone will
produce a Call Waiting tone (stutter tone). The other LINE key will flash in red. Answer the incoming
call by pressing the flashing LINE key. The current active call will be put on hold automatically.
DO
NOT
DISTURB
Do Not Disturb can be enabled/disabled from phone's LCD. Press the MUTE button for DND function while
the phone is in idle.
Or users could set it from phone's Menu following the steps below:
•
Press the Menu button and select "Preference" using navigation keys;
•
Press Menu button again to get into Preference options;
•
Select "Do Not Disturb" and press Menu button;
•
Use arrow keys to select and press Menu button to enable or disable "Do Not Disturb" feature.
