P a g e
|
22
HT801 Administration Guide
Settings” page. Password field is purposely left blank for security reasons after clicking
update and saved. Max. length is 25 characters.
Confirm Admin
Password
Confirms the new admin password.
Layer 2 QoS
Sets values for 802.1Q/VLAN Tag. Default is
0
. Valid range is 0-4094.
SIP 802.1p. Default is
0
. Valid range is 0-7.
RTP 802.1p. Default is
0
. Valid range is 0-7.
STUN Server is
Configures IP address or domain name of STUN server. Only non-symmetric NAT
routers work with STUN.
Keep-alive interval
Sends periodically a blank UDP packet to SIP server in order to keep the "ping hole" on
the NAT router open. Default is
20
seconds.
Use STUN to
detect
network
connectivity
Uses STUN keep-alive to detect WAN side network problems. If keep-alive request does
not yield any response for configured number of times (minimum 3), the device will
restart the TCP/IP stack. If the STUN server does not respond when the device boots
up, the feature is disabled. Default setting is
No
.
Use DNS to detect
network
connectivity
Uses DNS to detect WAN side network problems. Default setting is
No
.
Verify host when
using HTTPS
Enables / disables the host verification when using HTTPS.
Upgrade via
Selects firmware upgrade/provisioning method: TFTP, HTTP or HTTPS.
Firmware Server
Path
Sets IP address or FQDN of firmware server. The URL of the server that hosts the
firmware release. Default is
fm.grandstream.com/gs
.
Config Server Path
Sets IP address or FQDN of configuration server. The URL of the server that hosts the
configuration file to provision HT801. Default is
fm.grandstream.com/gs
.
XML Config File
Password
Decrypts XML configuration file when encrypted. The password used for encrypting the
XML configuration file using OpenSSL.
HTTP/HTTPS User
Name
Enters user name to authenticate with HTTP/HTTPS server.
HTTP/HTTPS
Password
Enters password to authenticate with HTTP/HTTPS server.
