Grandstream Networks GXP1760 Page 54 Administration Manual Download

Page: 54 / 63

P a g e

GXP17xx Administration Guide

Rebooting from Remote Locations

Press the "Reboot" button on the top right corner of the web GUI page to reboot the phone remotely. The

web browser will then display a reboot message. Wait for about 1 minute to log in again.

Packet Capture

GXP1760/GXP1780/GXP1782

is embedded with packet capture function on firmware 1.0.0.38 or greater.

The related options are under

Maintenance -> Packet Capture

Figure 4: Packet Capture in Idle

Users need to choose first the capture location either the internal storage or the connected USB and then

press

Start

button to start packet capture. Press

Stop

to end capture.

User can press

Download

button to download capture file to local PC.

Note

- User can also define whether RTP packets will be captured or not from

With RTP Packets

option.

- USB Filename is only required for USB and it defines the capture filename.

Multicast Paging

GXP1760/GXP1780/GXP1782

supports multicast paging, including sending and listening. On the phone,

users could send multicast page by setting the multicast address and port. Also, users can listen to at
most 10 different multicast IP address.

Multicast sender related settings are under Web UI,

Settings -> Programmable keys.

Select Multicast

paging as the key mode for dial page call. Multicast paging listening related settings are under Web UI

Settings -> Multicast Paging.

Summary of Contents for GXP1760
































































Search results

Summary of Contents for GXP1760

Reviews:

Related manuals for GXP1760

Brands by name

Popular brands

Grandstream Networks GXP1760, Administration Manual

Search results

Summary of Contents for GXP1760

Reviews:

Related manuals for GXP1760

Brands by name

Popular brands