Example of an IP Address USING HTTPS: 192.168.1.10/prov
Enter Auto Provisioning username and password into the Config HTTP/HTTPS User Name
■
and Config HTTP/HTTPS Password fields.
Click the Save and Apply button.
■
Click the Reboot button on the top navigation menu.
■
You will have to wait a couple of seconds for the configuration to be updated.
NOTE:
Do not
■
power off your phone.
The Auto provisioning process will start during the phone's reboot process, phone will pick up
■
an appropriate configuration file from PBXware. If everything is done as described above, you
should have successfully registered your phone to PBXware.
Dial *123 to verify registration.
DNS SRV
DNS SRV
This section describes how to use a DNS SRV record which specifies the location of PBXware.
NOTE:
Your DNS Server needs to be configured correctly for this to work. Bicom Systems can
provide service to set up this for you.
Check if the DNS SRV is enabled in your PBXware
Contact your PBXware administrator to find out if the DNS SRV is enabled in your PBXware,
■
or if you have access to the PBXware. You can also check this on your own.
Open a new browser window and enter the IP address in order to access the PBXware web
■
administration login screen. Example: http://192.168.1.10.
Log in to PBXware with your e-mail address and password.
■
Navigate to Settings: Servers. Click the server corresponding with the Edit button.
■
In Auto Provisioning group, make sure that Use DNS SRV when possible: is set to Yes. If
■
it is set to No or N/A, set to Yes and click the Save button.
NOTE:
You must re-save all your Extensions configured for Auto Provisioning.
Make sure that DNS server is configured to automatically route registration request to
■
PBXware which is actually under another domain name. Example: abc.bicomsystems.com.
