GXE 502X Quick Start Guide
10/25/07
Page 4
3.
Click on the button labeled: “Start Auto Provisioning” (See Figure 2-2). Once
the Automatic Extensions Provisioning screen loads (See Figure 2-3), the
GXE will begin finding devices by waiting for them to communicate via DHCP.
At this point, please start connecting all SIP devices/phones into the
switch/hub. The page will keep refreshing as the GXE looks for new devices.
In addition, your SIP devices/phones need to have DHCP enabled as well as have
DHCP Option 66 allowed to be auto-provisioned; these are factory default settings
on Grandstream products as well as many others.
Figure 2-2
To ensure proper auto-provisioning of Grandstream IP phones, connect the IP phones
to the switch/hub after Step 3, as the GXE will only auto-provision phones found
during this stage.
Figure 2-3
4.
As the SIP devices/phones are auto-provisioned, the “Number of extensions
provisioned” counter will increment to inform you of the auto-provisioning
progress. Press the “Stop Auto Provisioning and Done” button when all
devices are configured (See Figure 2-3). The Extensions Directory page will
load automatically (See Figure 2-4). This will show you the default operator
extension and all devices found during the Auto Provisioning step.
5.
You are now ready to make phone calls locally!! Try to make calls between
your extensions.
6.
To make a call pick up the receiver and dial the extension and press the send
button or #.
Figure 2-4