GVR3550 USER MANUAL
Grandstream Networks, Inc.
GVR3550 User Manual
Page
43 of 76
Firmware Version 1.0.0.0
Last Updated: 10/2013
(IO) ALARM CONFIG
Users could set different IPC alarm type to each channel corresponding channel,see figure 45.
Figure 45: GVR3550
IO Alarm Config Page
Input Port:
Select the input port No.
Event Type:
Select thee event type like Port Input Alarm
Alarm Enable:
Check to enable/unable the function
Alarm Status:
Two options available:Normal Open, Normal Close(Default). Please select according
to your alarm input type.Reboot to make changes take effect.
Port Name:
Input the name of alarm input to distinguish the alarm input ports
Arming
Time
Config:
Set arming time period
Click on
“
Arming Time Config
”
to bring out the page below. Users could set IO arming time period.
Figure 46: GVR3550
IO Alarm Config Page
Users could set various alarm actions in view of different channels and alarm types, such as Screen Prompt,
Buzzer, HDMI Alarm, Send Email, Alarm Output and Record Video, or copy the alarm to other
channels.Alarm Parameters settings procedures are the same as chapter
“
IPC Event Config
”
.
ABNORMAL ALARM CONFIG
Abnormal Alarm Config includes Disconnection Alarm,HDD Empty Alarm, HDD Full Alarm, HDD Error
Alarm and IP Conflict Alarm.See figure 47 below, users can set the alarm actions after selecting the
corresponding alarms.
Figure 47:
GVR3550 Abnormal Alarm Settings
Page
Disconnection
Alarm when detecting no cable access
