GAC2570 User Manual
Version 1.0.1.23
P a g e
|
149
the UCM server to request for recording, and the recording function will
be executed by the server.
•
If set to "
Record on Broadsoft
", then will send the recording feature
code to the Broadsoft server to request for recording, and the recording
function will be executed by the server.
If set to “
Disable
”, recording functionality will be disabled during calls.
Enable Auto Record
When Call Established
Configures whether to auto record a call. If enabled, all recordings will start
automatically after the call is established. The default setting is No.
Rejected Call
Notification
Specify whether to enable rejected call notification. Once enabled, a
missed call will prompt on LCD when reject the incoming call.
Return Code When
Refusing Incoming Call
When refusing the incoming call, the GAC2570 will send the selected type
of SIP message of the call. Available options are:
•
Busy(486)
•
Temporarily Unavailable(480)
•
Not Found(404)
•
Decline(603)
Default is Busy(486).
Return Code When
Enable DND
When DND is enabled, the GAC2570 will send the selected type of SIP
Message in reply to an incoming call (INVITE).
•
Busy(486)
•
Temporarily Unavailable(480)
•
Not Found(404)
•
Decline(603)
Default is Busy(486).
Ring Tone
Auto Config CPT by
Region
Configures whether to choose Call Progress Tone automatically by region.
If set to "Yes", the device will configure CPT (Call Progress Tone)
according to different regions automatically. If set to "No", you can
manually configure CPT parameters. The default setting is "No".
Call Progress Tones:
•
Dial Tone
•
Second Dial Tone
•
Ringback Tone
•
Busy Tone
•
Reorder Tone
Configures tone frequencies according to user preference. By default, the
tones are set to North American frequencies. Frequencies should be
configured with known values to avoid uncomfortable high pitch sounds.
•
Syntax
: f1=val,f2=val [,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing ("On time" in "ms") while OFF is the period of
