GRANDSTATE 11111411 E, Safety, Installation, Operation And Maintenance, Page: 20 / 52

20
Advice: If you use the rear infrared burner to grill food on a rotisserie, switch on 1 - 2 additional main burners
so that the inside temperature of the barbecue rises and best grilling results can be achieved. Make sure that
the main burners are not located directly below the grilled food (indirect grilling).
Electric energy (model-specific)
Always use the correct type of battery. Replace all batteries at the same time and pay attention to the correct
polarity. If the ignition system does not work, you should first replace the batteries to exclude further sources
of error.
4 x 1.5 V batteries are used to power the LEDs. For the starter of the infrared side burner / rear infrared burner
(depending on your model) you need 1 x 1.5 V battery.
Battery type: AA 1.5 V for the LED light and for the infrared side and rear burner.
Replacing the igniter battery of infrared side burner / rear infrared burner (model-specific)
If igniters stop sparking, the battery should be replaced.
A. Change the igniter battery
1. The igniter button cap is located centered on the control panel.
2. Unscrew igniter button cap counterclockwise to remove. Remove battery from the battery compartment.
3. Replace with a new alkaline “AA” size battery. Insert the battery with the negative end first.
4. Screw igniter button cap clockwise into place.
A: „AA“ Battery
B: Igniter Cap
Change the led battery (model-specific)
1. Find the battery box, open the lid.
2. Put 4 pc. “AA” size battery, the positive and negative pole of the battery should keep the same as
the pole in box.
3. Close the lid.
Hint
There’s a separate button on the right side of your BBQ for switching the LED illumination on and off.