6.
Push and turn the required control
knob to
‘HI’.
7.
Immediately press the electronic
igniter to light the burner.
9.
If ignition does not occur in 15 seconds, turn the burner
control knob(s) and gas source off and conduct a leak test
of ALL gas connections and gas source. If no leaks are
detected, wait 5 minutes for any gas to clear and repeat the
lighting procedure.
10. Once one burner is lit, the adjacent burner can be lit by turning
its control knob to
‘HI’.
Lid must be open before lighting. For easy ignition, push the
burner control in fully. Slowly rotate the burner control anti-
clockwise through 90 degrees
(approx. 3 - 4 seconds).
Turn the
burner control until a click is heard, this will trigger the piezo,
producing a spark at the burner.
The 3 - 4 second duration should
provide enough gas to light the burner.
If the burner does not light, immediately
return the burner control to the
‘OFF’
position and repeat the process.
Turn burner control to
‘HI’
following
lighting procedure until flame appears
on the burner. If for some reason the
igniter fails to produce a spark at the
electrode tip, the burner can be lit using
a match.
SIDE BURNER
To light your gas barbecue by match, insert a match into the lighting
stick and follow steps 1 through 6 of the barbecue lighting
instructions. Then, light the match and place lighting stick
through the lighting hole on the left side of the barbecue, as
shown below. Turn the nearest control knob to the
‘HI’
setting to
release gas. The burner should light immediately.
MANUAL LIGHTING
1.
Before each use, check all hoses for cracks, nicks, cuts,
burns or abrasions. If a hose is damaged in any way, do not
use your barbecue before replacing the hose with an
authorised part from the
‘Parts List’
. Also make sure all
gas supply connections are securely tightened.
2.
Familiarise yourself with the
‘Safety’, pages 3-5,
and
‘Maintenance’, pages 29-31,
in this manual. Do not smoke
while lighting barbecue or checking gas supply connections.
3.
Ensure the gas cylinder is filled.
4.
Open the barbecue hood.
5.
Set control knobs to
‘OFF’
and open the LP gas cylinder
valve to 1/4 - 1/2 open.
MAIN BURNER
O
P
E
R
A
T
I
O
N
24
24
Match
Lighting
hole
Lighting
stick
LIGHTING PROCEDURE
– Premium 321S, 323, 325, 326, 326X,
Professional 529