background image

P

R

E

-

A

S

S

E

M

B

L

Y

5

5

Before attempting to assemble your barbecue, check that all the
necessary parts have been included using the parts list opposite.
Inspect barbecue and trolley parts as you proceed. 

Contact your place of purchase for assistance regarding

replacement of any damaged or missing parts.  Supplier contact
details are on the back cover of the instruction manual.

Do not assemble or operate a barbecue that appears damaged.

Check that the barbecue supplied is correct for the gas type

being used.  There is a label on the side panel of the barbecue
above the gas connection.  Barbecues for use with gas cylinders
are labelled 

‘Universal LPG’

.  Barbecues for use with natural gas

are labelled 

‘Natural Gas’.

CHECK BARBECUE FOR ANY DAMAGE 

While it is possible for one person to assemble the barbecue,
we recommend asking for the assistance of another person when
manoeuvring some of the larger or heavier pieces. 

GENERAL

Description

Qty

Trolley side panel 

– right

1

Trolley side panel 

– left

1

Bottom shelf

1

Castor seat

4

Castors

4

Trolley bracket – 

front

1

Gas cylinder housing

1

Door hinge bracket – 

top left

1

Door hinge bracket – 

top right

1

Doors

2

Door guide

1

Door support bracket – 

upper

1

Barbecue body assembly

1

Side shelf – 

left

1

Side burner assembly –

right

1

Shelf brackets – 

A: LF/RR

2

Shelf brackets 

– B: RF/LR

2

Hardware pack

1

Hot plate

1

Grill plate

4

Flame tamer

4

CARTON CONTENTS 

Standard Phillips-head screwdriver.
Adjustable spanner 

(open end shifter).

TOOLS YOU WILL NEED

1.

Flatten cardboard packaging and use this as a protective
work surface to assemble upon.

2.

Some protective coating may need to be removed from
components prior to assembly.

3.

Do not tighten screws and nuts until trolley is fully assembled.

4.

Pre-screwing of connection points for securing the side
shelves will assist in securing shelves smoothly.

ASSEMBLY TIPS

• PARTS AND COMPONENTS MUST 

NOT BE MODIFIED OR ALTERED IN
ANY WAY. THIS COULD LEAD TO A 
HAZARDOUS SITUATION

• MODIFYING OR ALTERING ANY PARTS

OR COMPONENTS WILL VOID THE
WARRANTY.

Summary of Contents for 5009XB

























Reviews: