Page 10
iii. RST
menu
Press “RST”, all of the settings will be reset to the default settings.
④
Info Menu
"
NOTE:
Red dot indicates that the corresponding RJ45 output port is in single output
mode. Details please see the attached CD-ROM about RJ45 output mode switch
instructions.
Press “MS”-----View the current status of matrix
Press “M1”-----View the pre-existing state of matrix (Model 1)
Press “M2”-----View the pre-existing state of matrix (Model 2)
Press “M3”-----View the pre-existing state of matrix (Model 3)
Press “EQ”----- View the current EQ setting status of matrix
"
NOTE:
If the touch screen becomes insensitive, calibration is necessary
Touch screen calibration method:
Press the panel button “Setting” in the home menu status, holding until the following prompt
appears (about 4s).
Press the symbol's center, until the one disappears and another symbol appears, and press its
center again until the end of the calibration—OK or Failure. If the calibration is fail, please
