92
Ground Control 3.0 Manual
Rev: 06.28.18
Page 16
CCD-0001519
Manual Override
Top of Jack Motor Override:
Tools needed:
3/8
” drive ratchet and extension (no socket)
1.
Find the port on the top of the jack motor (Fig. 12A).
2.
Remove the rubber plug (Fig. 13A).
3.
Insert the
3/8
” drive ratchet into the port (Fig. 14).
4.
Turn the override until the jack extends or retracts to desired position.
Bottom of Jack Motor Override:
Tools needed:
3/8
” drive ratchet and extension,
5/16
” socket
1.
Find the port on the bottom of the jack motor (Fig. 12B).
2.
Remove the rubber plug (Fig. 15A).
3.
Insert the
5/16
” socket into the port (Fig. 16).
4.
Turn the override until the jack extends or retracts to desired position.
Fig. 12
Fig. 13
A
Fig. 14
Fig. 15
Fig. 16
A
A
B
Summary of Contents for Reflection Fifth Wheel 150 Series
