background image

12

USE  AND  CARE  INSTRUCTIONS

Keep  fire  extinguisher  readily  accessible.  In  the
event  of  a  oil/grease  fire,  do  not  attempt  to  extin-
guish  with  water.  Use  type  B  extinguisher  or
smother  with  dirt,  sand  or  baking  soda.

Keep  your  grill  covered  during  freezing  rain  or
snow.  Sleet  and  snow  can  block  the  regulator  vent
hole  resulting  in  improper  and  potentially  dangero-
us  regulator  pressure.

Use  your  grill  on  a  level,  stable  surface  in  an
area  clear  of  combustible  materials.

Do  not  leave  grill  unattended  when  in  use.

Do  not  move  the  appliance  when  in  use.

Cover  your  grill  when  not  in  use.

Allow  the  grill  to  cool  before  moving  or  storing.

Do  not  use  your  grill  as  a  heater.

This  grill  is  not  intended  to  be  installed  in  or  on
recreational  vehicles  and/or  boats.

    WARNING

!

!

Do  not  store  a  spare  LP-Gas  tank  under  or  near
this  appliance.
Never  fill  the  tank  beyond  80  percent  full;  and
If  the  information  in  "(a)"  and  "(b)"  is  not  followed
exactly,  a  fire  causing  death  or  serious  injury  may
occur.

A.

B.
C.

LP  Gas  grill  models  are  designed  for  use  with  two
standard  20  lb.  Liquid  Propane  Gas  (LP  Gas)  tanks,
not  included  with  grill. 

Never 

connect  your  gas  grill  to

an  LP  Gas  tank  that  exceeds  this  capacity.  A  tank  of
approximately  12  inches  in  diameter  by  18-1/2  inches
high  is  the  maximum  size  LP  Gas  tank  to  use. 

You

must  use  an 

"

OPD"  gas  tank  which  offers  a  listed

Overfill

 

Prevention  Device.

  This  safety  feature

prevents  tank  from  being  overfilled  which  can  cause
malfunction  of  LP  Gas  tank,  regulator  and/or  grill.

The  LP  Gas  tank  must  be  constructed  and  marked
in  accordance  with  the  Specifications  for  LP-Gas
Cylinders  of  the  U.S.  Department  of  Transportation
(D.O.T.)  or  the  National  Standard  of  Canada,  CAN/
CSA-B339,  Cylinders,  Spheres  and  Tubes  for
Transportation  of  Dangerous  Goods;  and  Commis-
sion,  as  applicable.

The  LP  Gas  tank  must  have  a  shutoff  valve,
terminating  in  an  LP  Gas  supply  tank  valve  outlet,
that  is  compatible  with  a  Type  1  tank  connection
device.  The  LP  Gas  tank  must  also  have  a  safety
relief  device  that  has  a  direct  connection  with  the
vapor  space  of  the  tank.

The  tank  supply  system  must  be  arranged  for
vapor  withdrawal.

The  LP  Gas  tank  used  must  have  a  collar
to  protect  the  tank  valve.

Never 

connect  an  unregulated  LP  gas  tank  to  your

gas  grill.  The  gas  regulator  assembly  supplied  with
your  gas  grill  is  adjusted  to  have  an  outlet  pres-
sure  of  11"  water  column  (W.C.)  for  connection  to
an  LP  gas  tank.  Only  use  the  regulator  and  hose
assembly  supplied  with  your  gas  grill.  Replacement
regulators  and  hose  assemblies  must  be  those
specified  by  the  Manufacturer.

Have  your  LP  Gas  dealer  check  the  release  valve
after  every  filling  to  ensure  it  remains  free  of  defects.

Always  keep  LP  Gas  tank  in  upright  position.

Do  not subject  the LP Gas tank to excessive  heat.

Never  store  an  LP  Gas  tank  indoors.  If  you  store
your  gas  grill  in  the  garage 

always

  disconnect  the

LP  Gas  tank  first  and  store  it  safely  outside.

LP  Gas  tanks  must  be  stored  outdoors  in  a  well-
ventilated  area  and  out  of  the  reach  of  children.

Disconnected  LP  Gas  tanks  must  not  be  stored  in
a  building,  garage  or  any  other  enclosed  area.

The  regulator  and  hose  assembly  can  be  seen
after  opening  the  doors  (if  applicable)  and  must  be
inspected  before  each  use  of  the  grill.  If  there  is
excessive  abrasion  or  wear  or  if  the  hose  is  cut,  it
must  be  replaced  prior  to  using  the  grill  again.

Never

  light  your  gas  grill  with  the  lid  closed  or

before  checking  to  ensure  the  burner  tubes  are  fully
seated  over  the  gas  valve  orifices.

Never

  allow  children  to  operate  your  grill.  Do  not

allow  children  or  pets  to  play  near  your  grill.

Use  of  alcohol  or  drugs  may  impair  the  ability  to
assemble  and  operate  the  appliance.

CORRECT  LP  GAS  TANK  USE

    WARNING

!

!

Use  your  grill  outdoors,  at  least  3  feet  away
from  any  wall  or  surface. 

Use  your  grill  at

least 

3  feet  away

  from  combustible  objects

that  can  melt  or  catch  fire  (such  as  vinyl  or
wood  siding,  fences  and  overhangs)  or
sources  of  ignition  including  pilot  lights  on
water  heaters  and  live  electrical  appliances.

Never

 use  your  gas grill in a garage, porch,

shed,  breezeway  or  any  other  enclosed  area.

Never 

 obstruct  the flow  of ventilation  air  around

your    gas  grill    housing.

Summary of Contents for CGE06ALP





















Reviews: