Granberg Verti 830 User Manual Download Page 7

6. Safety arrangements

Below the bottom shelf there is a fully covering safety trip plate with reversal operation. If the trip plate is pressed
the Verti will lift until the obstacle that activated the movement does not actuate the trip plate any longer.

At the lift top there is also a safety trip plate, which stops the lifting motion if any object on the upper shelf is too
high.
Be aware of that the trip plate requires a certain force to become activated, so too brittle objects may break before
the safety plate has been pressed in. The trip plate function shall be check often.

7. Load distribution and side forces

Basic loading requirements:

100 % of the rated load distributed over the entire cabinet volume.
The Centre of Gravity of the load is assumed to be in or under the cabinet centre.
Horizontal forces are not allowed.

Horizontal forces can appear, for example, when pressing onto the shelves or the load.
It is difficult to estimate the size of the actual horizontal force, so utmost care must always be taken.

Further to the incorporated safety arrangements additional can safety actions may be required on or at the Verti lift.
Discuss suitable actions with your Granberg representative or with the health and safety inspection.

We recommend that a Risk assessment in accordance with the Machinery Directive shall be made for the actual
working conditions.

If the owner fits accessories, contact Granberg to get approval of the loading conditions.

 

Incorrect load distribution!

  Correct load distribution!

8. Actions after use

The Verti unit shall after use be left fully raised to the top level, the parking position.

Switch off the main switch and lock it in closed position, if unauthorized use can occur.
To prevent unauthorized use can it is also possible to furnish the control panel with a key switch, by means of which
the control circuit is disconnected. It can also is placed inside a lockable cabinet.

Granberg Interior AB - Box 6112 - 600 06  Norrköping - SWEDEN
Tel: +46-11 19 77 50 - E-mail: [email protected] - Internet: www.granberg.se

Summary of Contents for Verti 830










Reviews: