Granberg Verti 830 User Manual Download Page 5

5. Safe use

In order to utilise the properties of Verti lift and to prevent and avoid damages it is important that you carefully read
the instructions and operates it in the right way.

Only use the Verti for its intended purpose.
The operation and use must be made in such way that there is no risk for damages on persons and property.
Be aware of that you as an operator are responsible for that nobody is damaged.
The lift and the work area must be in proper condition. The Verti must not be used if any fault has appeared
which influences the functions or the operation safety. It shall also not be used if it has been repaired,
altered or adjusted without permission of a responsible person.
The Control devices shall be placed so that the operator has got full view over Verti and its work area when
operations are made.
Never let the Verti come in contact with adjacent objects.
Safety devices must not be taken out of service or removed.
Alterations of the Verti that influence the operational safety or the functions are not allowed.
Decals and markings must not be removed or made illegible.
Use safe and sufficient lifting methods, when handling load to and from Verti. In particular beware when
handling heavy items, and goods with hazardous content or with sharp corners and edges.
The Verti unit shall regularly, once a year, be inspected in order to prevent accidents.
Applicable Building and Safe use Regulations must be complied with.
It is forbidden to stay in wall the cabinet, to hang in the cabinet shelves or to use the lift for lifting of
persons.
Do not use the Verti as a lifting jack, e.g. for lifting from the floor.
The machine must not come in direct contact with food
Do not use the Verti in a potentially explosive environment.
When the operation is in a public location, particularly when children can enter the work area, the operator
shall make satisfactory arrangements to prevent persons from entering the hazardous area when the lift is
being operated, or it has been lowered from the parking position, e.g. by means of blocking the work area or
by means of adding protection devices.
During inspections, service and repair work there shall be no load in the cabinet. It can be necessary to
demount the shelves from the lift to carry out service or repair.
Competent persons only must carry out Installation, service and repair works. Only Granberg original spare
parts shall be used when replacing any parts. Our warranty commitment can otherwise be invalidated.

Placement of household items.

Place the goods in good order with the most frequently used at the lower part of the cabinet. Make sure that the
objects do not extend outside the shelves. Mind that the objects may roll, slide or fall out of the cabinet. Spread out
light and heavy items so that the weight is uniformly distributed and balanced on the shelves.

Suitable items to be placed in Verti

In the cabinet you can keep e.g.: crockery, drinking glasses, bowls, cups, and mugs, groceries in hard packages.

Unsuitable items

Saucepans, fry pans and other items with projecting long handles. Cutlery and other small loose items, unless they
are placed in stable holders. Fluids, e.g. drinks in soft packages. Items packed in soft plastic or papers bags. Carving
knifes.

Acceptable height for objects placed in the mid section of the upper shelf

The max. height of objects on the upper shelf in the mid section is 10 cm. At the sides max. 23 cm.

Running up or down

The Verti unit lowers or raises the shelves in a vertical movement to or from a work area under it. Operation is made
with the buttons UP respectively DOWN (marked with arrows for the resp. directions). The movement continues as
long as the button is kept pressed, or to until the end position is reached. Only press the button for the desired
direction. Do not touch any part of the lift, cabinet or the shelves during operation.

Only operate one lift unit at a time

If the kitchen contains more than one lifting unit you may only operate one lift at a time, to make sure of that you
have full control over the movements.

Operation with open or closed cabinet doors

The cabinet doors may be open or closed. Observe the following:

Open doors: Increased risk that instable items will fall out from shelf.
Closed doors: Make sure that no items are projecting outside the shelves as these can be tripped by the
bottom edges of the cabinet doors.

Granberg Interior AB - Box 6112 - 600 06  Norrköping - SWEDEN
Tel: +46-11 19 77 50 - E-mail: [email protected] - Internet: www.granberg.se

Summary of Contents for Verti 830










Reviews: