10. Fault finding
The product is designed and tested to achieve optimum operation reliability and long life, provided that the
operation, maintenance and inspections are carried out in accordance with the prescribed instructions. If in spite of
this a fault appears you can get guidance about what to do according to the fault finding list below. Remove the load
from the internal cabinet before fault finding and repair work is carried out. Fault finding, service and repair work
shall made by competent persons only.
Symptom
Action
The internal cabinet lift does not move when a control
signal is given
Check that the fuse for the mains feed is not damaged.
Check that the mains plug is connected.
Check that the safety trip panel is not actuated.
Check that the wires are properly fastened in the
control box and in the control button.
If any problem remains after you have taken actions in accordance with the list below you must contact a competent
technician or you supplier.
11. Spare parts list
If any component does not work or has broken, contact your supplier. Only Granberg original spare parts must be
used when replacing any parts. Our warranty commitment may otherwise be invalidated.
Return of spare parts:
Contact Granberg prior to any return of parts.
Do not return any parts that have been worn out during normal operation or accidentally damaged. Only return worn
or damaged parts if it is considered that the fault is covered by our warranty conditions. In such cases, return the
parts without delay, otherwise the right to replacement may be lost.
When ordering spare parts always quote the manufacturing number and type.
Transformer
Control button, aluminium
Remote control
Granberg Interior AB - Box 6112 - 600 06 Norrköping - SWEDEN
Tel: +46-11 19 77 50 - E-mail: [email protected] - Internet: www.granberg.se
