Granberg InDiago 510 Series User Manual Download Page 5

5. Safe use

In order to utilise the properties of the InDiago 510 and to prevent and avoid damages it is important that you
carefully read the instructions and operates it in the right way.
The lift is a diagonal lift that lowers an internal cabinet along an arc-shaped path down to the worktop level below
it.
The travel can be stopped at any height.
It is provided with safety arrangements in order to prevent and avoid damages and accidents.
It is however still very important that the operator is well instructed in how to install and operate the liftingsystem.
In the following the lifting system means the lifting machine incl. internal cabinet and the wall cabinet in which the
InDiago 510 is installed.

Only use the lifting system for its intended purpose
The operation and use must be made in such way that there is no risk for damages on persons and property.
The lifting system may only be operated by persons who have read and understood these instructions, and
are authorized to use it.
Be aware of that you as an operator are responsible for that nobody is damaged.
The lifting system and the work area must be in proper condition. The lifting system must not be used if any
fault has appeared which influences the functions or the operation safety. It shall also not be used if it has
been repaired, altered or adjusted without permission of a responsible person.
Make sure that the lifting system is installed on a firm, flat and fully vertical wall, with sufficient attachment
devices for the total weight. Only competent persons shall make the installation.
The Control buttons shall be placed so that the operator has got full view over the lifting system and its
work area when operations are made.
Do not touch any part of the lift when operating it. Only press the button for desired motion direction.
Do not put hands, arms, or any other part of the body or any object into the lifting system when it is brought
from the parking position. The parking position means when the lifting system is fully inside the wall
cabinet, i.e. at the top level.
Keep in mind that when the lifting system has left the parking position the risk increases to get damaged by
the lifting system and the doors.
Do not lower the lifting system unless the space below it is free of persons or objects. In particular if the
lifting system unit is installed above a workbench with adjustable height there is an imminent risk that you
do not notice objects or equipment that might be trapped.
Observe the risk for collision between the lifting system and the Workbench. Note especially the risk to
come in collision with the mixer tap.
Only stable and securely loaded items may be handled. Mind the tilting risk for objects in the cabinet, which
are unstable, e.g. carelessly piled.
Safety devices must not be taken out of service or removed.
Alterations of the lifting system that influence the operational safety or the functions are not allowed.
Decals and markings must not be removed or made illegible.
Do not overload the lifting system.
Always distribute the load within the cabinet, to avoid cantilevered loading. Consider the risk that the load
can roll, slide or fall over.
If the cabinet have no doors the risk is even bigger that objects may fall out of the cabinet.
Use safe and sufficient lifting methods when handling load to and from the lifting system. In particular
beware when handling heavy items, and goods with hazardous content or with sharp corners and edges.
The lifting system unit shall regularly, once a year, be inspected in order to prevent accidents.
The lift may not be operated when there are saucepans/frying pans in use on the cooker, nearby or under
the lifting system. There is a risk that these will fall over if they are hit by the lifting system.
Applicable Building and Safe use Regulations must be complied with.
It is forbidden to stay in wall the cabinet, to hang in the cabinet shelves or to use the lift for lifting of
persons.
Do not use the lifting system as a lifting jack, e.g. for lifting things from the floor.
The machine must not come in direct contact with food
Do not use the lifting system in a potentially explosive environment.
When the operation is in a public location, particularly when children can enter the work area, the operator
shall make satisfactory arrangements to prevent persons from entering the hazardous area when the lift is
being operated, or it has been lowered from the parking position, e.g. by means of blocking the work area or
by means of adding protection devices.
During inspections, service and repair work there shall be no load in the cabinet. It can be necessary to
demount the internal cabinet from the liftin mechanism to carry out service or repair.
Competent persons only must carry out installation, service and repair works.
Only Granberg original spare parts shall be used when replacing any parts. Our warranty commitment can
otherwise be invalidated.

Granberg Interior AB - Box 6112 - 600 06  Norrköping - SWEDEN
Tel: +46-11 19 77 50 - E-mail: [email protected] - Internet: www.granberg.se

Summary of Contents for InDiago 510 Series








Reviews: