Gram TLS 3751-90, User Manual

Page: 21 / 36

21 / EN
Dryer / User Manual
5.12 Child-proof Lock
Machine is equipped with a Childproof Lock which pre-
vents interfering with the current programme flow by
pressing any button. All buttons except the On / Off but-
ton on the control panel are deactivated when the Child-
proof Lock is active.
In order to activate the Childproof Lock, press Audio
Warning and Anti-Creasing buttons simultaneously for 3
seconds.
To start a new programme after the current programme
is over or to interrupt the current programme, the Child-
proof Lock should be deactivated. Press the same buttons
for 3 seconds again to deactivate the Child-proof Lock.
C
Lock symbol will appear on the display
when the Child-proof Lock is activated.
C
Child-proof Lock is deactivated when the
machine is switched off and on with On /
Off button.
When the Child-proof Lock is activated:
• Display symbols will not change even if the position
of Programme Selection knob is changed while the
machine is running or in halt.
• If the Child-proof Lock is deactivated after changing
the position of the Programme Selection knob while
the machine is running, the machine stops and new
programme information is displayed.
5.13 Changing the programme after it
has started
After the machine starts, you can change the selected
programme and dry your laundry in a different pro-
gramme.
1. If you want to select Extra Dry programme instead
of Iron Dry programme, press and hold the Start /
Pause / Cancel button for 3 seconds to cancel the
programme.
2. Select Extra Dry programme by turning the
Programme Selection knob.
3. Press Start / Pause / Cancel button to start the pro-
gramme.
C
You can also select a new programme by
turning the Programme Selection knob
while the machine is operating. In this
case, current programme is aborted and
the new programme information appears
on the display.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying pro-
gramme has started:
1. Press Start / Pause / Cancel button to switch the
machine to Pause mode. Drying process will stop.
2. While in Pause mode, open the loading door, add or
take out laundry and close the loading door.
3. Press Start / Pause / Cancel button to start the pro-
gramme.
C
Any laundry added after the drying process
has started may cause the clothes that are
already dried in the machine intermingle
with wet clothes and the result will be wet
laundry after the drying process is over.
C
You may repeat laundry adding or remov-
ing process as many times as you desire
during drying. However, this process will
increase the programme time and energy
consumption since the drying process will
be interrupted repeatedly. Therefore, it is
recommended to add laundry before the
drying programme has started.
C
If you select a new programme by turning
the Programme Selection knob while your
machine is in Pause mode, then the current
program is aborted and new programme
information is displayed.
Do not touch the inner surface of the drum
when adding or taking out laundry while
a programme is running. Surfaces of the
drum are hot.