Gram TLS 3751-90, User Manual

Page: 19 / 36

19 / EN
Dryer / User Manual
5.7 Auxiliary functions
Audio Warning
The machine will give an audio warning when the pro-
gramme comes to an end. If you do not want the machine
give an audio warning, press the Volume Level button
repeatedly until “x” appears on the display. Use the same
button to adjust the volume level.
C
You can activate this function either before
or after the programme starts.
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Dryness level
Used to adjust the required dryness level. More drying
is performed compared to the default settings when “+”
sign appears and less drying is performed when “-” sign
appears. Programme duration can change depending on
the selection.
C
You can activate this function only before
the programme has started.
Anti-creasing
You can use Anti-creasing function to prevent laundry
from creasing if you will not take the laundry out after
the program has come to an end. This program rotates
the laundry in every 240 second for 2 hours to prevent
creasing.
Anti-creasing is activated but the programme is still
running in the first display image below. Drying cycle is
completed and the Anti-creasing step has started in the
second display image.
C
Press Anti-creasing button to activate this
function.
Changing the contrast
Adjust the display contrast in order to make the symbols
on the display appear clearer. It may particularly be nec-
essary to change the contrast setting of the display when
the dryer is installed over a washing machine.
Press and hold the Spin Speed / Timer Programme button
for 3 seconds.
When the contrast is changed, all symbols on the display
will appear for 3 seconds in order to indicate that the
process is complete.
C
Perform the same procedure to revert
back to the previous contrast setting.
5.8 Warning symbols
C
Warning symbols may differ according to
the model of your machine.
Lint filter cleaning
When the programme is completed, a warning symbol
will appear to remind that the filter needs to be cleaned.
C
If the Filter Cleaning symbol flashes
continuously, refer to “Troubleshooting”
section.
Water tank
When the programme is completed, a warning symbol
will appear to remind that the water tank needs to be
drained.
If the water tank becomes full while the programme
is running, the warning symbol will start to flash and
machine will pause. Drain the water in the water tank
and press Start / Pause / Cancel button to resume the
programme. The warning symbol turns off and the pro-
gramme resumes operating.
Cleaning of filter drawer
Warning symbol flashes with certain intervals to remind
that the filter drawer needs to be cleaned.