EN
User guide
Temperature control and adjustment
The internal temperature could be adjusted by
the thermostat control.
The temperatures obtained inside the
appliance could oscillate depending on the
usage conditions: location, environmental
temperature, doors opening frequency, the
quantity of food. The position of the
thermostat control will change depending on
these conditions. Generally, for an
environmental temperature of 25°C (77°F),
the thermostat control will be settled in a
medium position.
Avoid some positions of the thermostat control
that could involve a continuously running of
the appliance. This could involve a
temperature decrease under 0°C, and
therefore the drinks and fresh food could
freeze and an excessive ice quantity could be
accumulated on the internal wall. Therefore
adjust the thermostat control to obtain the
desired temperature. Some sections of the
fridge may be cooler or warmer (such as the
vegetable drawer and top part of the cabinet)
which is quite normal.
We recommend that you check the
temperature with an accurate thermometer to
ensure that the storage compartments are
kept to the desired temperature. Remember to
read off the thermometer very quickly as the
temperature on the thermometer will rise very
rapidly after you remove it from the freezer.
Please remember that each time the door is
opened cold air escapes and the internal
temperature rises. Therefore never leave the
door open and ensure that it is closed
immediately after food is put in or removed.
4
Before operating
Before you start using the refrigerator check
that:
1. The legs have been adjusted for perfect
levelling.
2. The interior is dry and that air can
circulate freely at the back of the appliance.
3. The interior is clean as recommended
under the "Cleaning and care" section.
4. The plug is inserted into the wall socket
and the electricity supply is switched on.
Avoid accidental disconnection by placing
sticky tape on the switch.
And note that:
5. You will hear a noise as the compressor
starts. The liquid and gases sealed within the
refrigeration system may also make some
noise, whether the compressor is running or
not. This is quite normal.
6. The top of the cabinet may be slightly
currugated which is quite normal due to the
manufacturing process used; it is not a defect.
7. We recommend setting the thermostat
control midway and monitor the temperature
to ensure that the appliance maintains the
desired storage temperatures (see the
"Temperature control and adjustment"
section).
8. Do not load the appliance immediately
after it is switched on. Wait until the correct
storage temperature has been reached. We
recommend checking the temperature with an
accurate thermometer (see the "Temperature
control and adjustment" section).
