17
Span calibration
Display shows:
Press
key to enter into the parameter.
To key the calibration value, use
,
keys to move from digit to digit and
use
,
keys to increase or decrease the value of each digit. (Press the
key to return to last step).
After the desired calibration value has been keyed, press the
key to
confirm and enter into calibration procedure. The display will show:
Put the mass with weight the same as the display showing on the pan, when
the display is stable, the balance will return to normal weighing mode. The
calibration procedure is finished.
• Calibration weight value: Any weight over 10% full capacity can be keyed
in as calibration weight value. (Weight over half capacity is recommended