WEIGHT UNIT SELECTION
1. Keep the key pressed for 3 minutes.
2. The message
“Unit”
will light.
3. Press the key to confirm.
4. The message
“Unit”
will light again.
5. Press the key to choose the desired weight unit.
6. To confirm, press the key.
TARE
This function allows obtaining the net weight of a product.
1. With display showing zero value, place a container on the weighing pan.
2. Press the key.
3. The balance will subtract the container´s weight, put the product into the
container and then read the product´s weight on the display (net weight).
To return to normal weighing mode, remove the container from platter and press
the key.
PIECES COUNTING FUNCTION
1. Press the key for 3 seconds.
2. The display will show the message “Unit”
3. Press again the key.
4. The display will show the message “Count”
5. Press the to confirm.
6. The message “pcs” will appear on the display.
7. Press the key.
8. Select the sample number from “10pcs” to “500pcs”.
9. Put on the platter the quantity of pieces that corresponds to a selected value.
10. Press the key.
11. The display will show “- - - - - -“ for a few seconds.
12. The balance is ready to perfom the counting of pieces.
5
Summary of Contents for STZ-100
Page 2: ...INDICE SOMMAIRE 2 ...
