Gram Precision C6-10T, Operation Manual

Page: 6 / 16

6
Check accumulation
At weighing mode, press , it will display the times and the value of current
accumulation, after then back to normal weighing mode automatically.
Clear accumulation
At weighing mode, press , it displays “ADD---” and back to weighing
mode which means clear the current accumulation.
PARAMETERS SETUP
In weighing status, hold
for more than 5s and entering setup mode. (P
mode, all the setting in this mode should be recorded with the calibration
header on; or the data will lose.)
P1~P13 parameters are available, press
to switch, and press to
select parameter. Detail for parameter:
1. P1 x
kg Lb shift
X=1: kg mode (default)
X=2: Lb mode
2. P2 x
Not available for this model
3. P3 x
Baud rate setup
X=1: 9600 (default)
X=2: 4800
X=2: 2400
X=2: 1200