11/31
GrainPro
®
Carbon Dioxide Analyzer Instruction Manual
MA4068RAD0718 - 2
5.2.5
Last Calibration date appears
5.2.6
Warming Up for < 60 seconds
5.2.7
At the end of the warming up, the Main Menu page
of the CO
2
analyzer will appear. This shows
information on the operating mode selection:
a)
“UP” Key for Sampling
b)
“DN” Key for Calibration
c)
“SET” Key for Settings
d)
“ENT” Key for Download/Reset
5.3.
Setting Mode
5.3.1
Accessing parameter setting mode:
a)
From the Main Menu, press the “SET” Key
to
enter into the setting page.
b)
Press “UP” Key , enter password using Up Key
for increasing the value (0 to 9) and Down Key
to shift the cursor.
NOTE:
The password for Setting mode is 123.
c)
Press “ENT” Key to confirm.
5.3.2
Set Serial Number:
a) Present serial number will appear.
b)
Just press “ENT” Key to continue.
NOTE:
Be careful not to change the serial number.
