8/24
GrainPro
®
Gas-Hermetic Fumigation/Self-Verifying Cocoon™ Instruction Manual
MA2021TDB1199-19
5.
INSTALLATION
5.1.
SITE SELECTION
5.1.1. In selecting a site, look for:
a. G-HF Cocoon is designed for both
indoor and outdoor installations.
b. A smooth area away from standing or
running water.
c.
Ensure that the site is protected from
stray animals and from theft.
d. Shade
(otherwise
under
a
GrainShade™)
to
minimize
temperature differences.
5.1.2. Prepare the selected site by clearing away all sharp objects (stones, broken glass, nails, etc.)
that may puncture the G-HF Cocoon. Sufficient space to accommodate the G-HF Cocoon and
an inspection path around (at least 50 cm each side).
5.1.3. If ground will be used as flooring, put a
layer (5cm) of fine sand (or any equivalent)
on top of the soil as ground foundation.
5.1.4. During loading, make sure that workers do not wear shoes with spikes that may damage the
G-HF Cocoon. Preferably, choose a site that offers ease in loading/unloading, away from
crowded areas and rubbish. For indoor installation, clean the area to remove sharp objects.
5.2.
LOADING
5.2.1. Check the moisture content of the
commodity to ensure the MC is at a safe
level.
5.2.2. Loading the bottom section:
a. Unfold the bottom section of the
Cocoon and lay it out on the prepared
site.
b. Start piling the sacks on the bottom
section.
c. Put down the first four bags each in
every corner of the G-HF Cocoon.
d. Make sure that the bottom section is
stretched by pulling the corners with
the bags. Stretching will reduce the risk
of rodent damage.