background image

•  Cooling coil: We recommend using the 

Grainfather High Performance Cleaner to clean 

your equipment. Follow the instructions on 

the packaging for how to use. If using another 

cleaner, please ensure that it is suitable for 

cleaning stainless steel equipment. 

•  The rubber bung stoppers can be inserted into 

the coil inlet and outlet, and the hoses, when not 

in use.

  NOTE: To ensure that these are effective, you’ll 

need to use some force when pushing the bungs 

into the coil/hoses.

•  Heating pad: Simply wipe clean with 

a damp cloth.

•  GCA: If necessary, wipe with a damp 

cloth but avoid contact with any 

electrical connections.

•  Once you have cleaned your equipment, 

dry, reassemble and store.

ADVICE FOR CLEANING & STORAGE

This device complies with Industry Canada license-exempt RSS standard(s) 
and FCC part 15. Operation is subject to the following two conditions: (1) 
this device may not cause interference, and (2) this device must accept any 
interference, including interference that may cause undesired operation of 
the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables 
aux appareils radio exempts de licence ainsi qu’á la section 15 du 
règlement FCC. L’exploitation est autorisée aux deux conditions suivantes 
:(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de 
l’appareil doit accepter tout brouillage radioélectrique subi, même si le 
brouillage est susceptible d’en compromettre le fonctionnement.

IC Radiation Exposure Statement: This equipment complies with IC 
radiation exposure limits set forth for an uncontrolled environment. 
This equipment should be installed and operated with minimum 
distance 20cm between the radiator & your body.

Déclaration d’exposition aux radiations: Cet équipement est conforme 
aux limites d’exposition aux rayonwnements IC établies pour un 
environnement non contrôlé. Cet équipement doit être installé et 
utilisé avec un minimum de 20 cm de distance entre la source de 
rayonnement et votre corps. 

www.grainfather.com

Version: 1

IMPORTANT SAFEGUARDS:
READ AND FOLLOW ALL INSTRUCTIONS
CAUTION – 

Risk of fires and electric shock.  

 

– 

Do not immerse in water.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
FOR COMMERCIAL AND FOR INDOOR USE ONLY 

WARNING

AVERTISSEMENT

RISK OF ELECTRIC SHOCK . DO NOT OPEN.

RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR

Download the FREE  

Grainfather App

GET IN TOUCH: 

Online:

 

help.grainfather.com/hc/en-us/requests/new

NZ +64 6 888 3027

AU +61 2 8074 3798

US +1 (562) 354-4603

UK/EU +44 1750 432048

RESOURCES: Check out our YouTube Channel for helpful videos. For more information, 

visit our Grainfather Help Centre: help.grainfather.com

Summary of Contents for GCA











Reviews: