background image

750000-INS-LAB-RevA08 

3

IntroduCtIon

Use this manual for set-up and operation of the Alternating 
Pressure / Low Air Loss Mattress System. Read all instruc-
tions before using the mattress system. Save this manual 
for future reference.

Intended use of thIs devICe

The intended use of the Alternating Pressure / Low Air 
Loss Mattress System is:
•  The treatment of pressure ulcers while optimizing user 

comfort.

•  Pain management as prescribed by a physician.
•  As described above, in either a homecare or long-term 

care setting.

Important safety preCautIons

The safety statements presented in this chapter refer to 
the basic safety information that should be observed by 
those using the Alternating Pressure / Low Air Loss Mat-
tress System. There are additional safety statements in 
other chapters or sections, which may be the same as or 
similar to the following, or specific to the operations.

DANGER: Indicates an imminent hazard situation 

that, if not avoided, will result in death or serious 

injury.
WARNING: Indicates a potential hazard situation or 

unsafe practice that, if not avoided, could result in 

death or serious injury.

s

Caution: Indicates a potential hazard or unsafe prac-
tice that, if not avoided, could result in minor person-
al injury or product/property damage.

Note: Provides application recommendations or other 
useful information to ensure that you get the most from your 
product.

 

Summary of Contents for LUMEX AltaDyne 750000

















Reviews: