FR587WD-INS-LAB-RevB18 7
Place Clevis Pins
Place Cotter Pins
Replace Side Panel
8. Raise the upholstered back to vertical position.
Tuck the plastic skirt at rear of upholstered
back behind seat frame crossbrace. Align the
hinges at the bottom of the gas springs with
the holes in the U-brackets on the seat frame
crossbrace. While holding the back in position
with one hand, secure both gas spring hinges
to the U-brackets by placing two
5
/
16
"diameter
clevis pins through the U-brackets and hinges
with the other hand.
9. Secure the clevis pins by placing the ring cotter
pins through the hole in the clevis pins as
shown at right.
10. Re-install side panel: insert side panel
into recliner frame by lining up side
panel clips with frame tubes. Push
side panel firmly into frame until
side panel clips lock into place.