FR587WD-INS-LAB-RevB18 6
3. Remove cardboard shipping
retainers and tape from around
gas spring cylinders. Rotate the
hinge section on the gas spring
so that it is perpendicular to the
upholstered back, as shown at
right.
4. Remove side panel: grasp
upholstered side panel from
both sides. Pull sharply out
from recliner until locking
clips release side panel from
frame.
5. Lift the upholstered back
from the sides and place it
horizontally with the
upright back tubes resting
on the recliner frame.
6. Align the holes on the
upright back tubes of the
upholstered back with the
holes on the seat frame.
Place the
3
/
8
" diameter
clevis pins through the
mounting holes in the frame
and back as shown at right.
7. Secure the two clevis pins
by placing a large cotter
pin through the hole in the
clevis pin (one for each
side) as shown at right.
clevis pin
cotter pin
Remove Side Panel
Clevis Pin and Cotter Pin
Align Holes
Place Clevis Pins
Place Cotter Pin
Cotter Pin
gas spring hinge
Rotate HInge