3
Always on
Target
Graflex, Incorporated
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the PTC80 Controller. Follow the safety
instructions listed below. Keep these operating instructions handy for future reference. A dimen-
sion drawing of the PTC80 Controller is shown at the bottom of this page.
1) Read these instructions.
2) Keep these instructions.
3) Pay attention to all warnings.
4) Follow all instructions.
5) Do not install this unit by suspending it.
6) Do not install this unit on its side.
7) The power must be off while installation or
cable connections are underway.
8) Do not connect the serial I/O Connector and
power connector until checking for proper
connections and the power switch being in
the OFF Position.
9) Do not operate the PTC80 Controller under
any circumstances while installation is un-
derway.
For further information, contact:
Graflex, Incorporated
Voice: 561-691-5959; Fax 561-691-5983
15855 Assembly Loop, Suite 100
email: [email protected]
Jupiter, Florida 33478 USA
4.00”
8.00”
2.00”
5.
75”
6.
00”
