11
Always on
Target
Graflex, Incorporated
For further information, contact:
Graflex, Incorporated
Voice: 561-691-5959; Fax 561-691-5983
15855 Assembly Loop, Suite 100
email: [email protected]
Jupiter, Florida 33478 USA
There are several functions which may be selected by using the preset switches in combi-
nations described below. Figure 3.2 shows a label located on the bottom of the chassis.
The label is a description of these functions .
3.2
Special Functions
To activate any of these functions, both the PRG and the PAGE switches must be simulta-
neously depressed and held down.
A.) Depress and release Preset Switch 1 and then release the PRG and PAGE switches.
The pan & tilt head will begin a continuous preset 1 to 5 sequence and continuously
repeat the sequence until another control is activated.
B.) Depress and release Preset Switch 2 and then release the PRG and PAGE switches.
The
pan & tilt head will begin a continuous preset 6 to 10 sequence and continuously
repeat the sequence until another control is activated.
C)
Not Used
D.) Depress and release Preset Switch 4 and then release the PRG and PAGE switches.
The azimuth position encoders will be zeroed.
E.) Depress and release Preset Switch 5 and then release the PRG and PAGE switches.
The elevation position encoders will be zeroed.
Figure 3.2
