Grafen CS20 A, User Manual, Page: 7 / 28

7
EN
1.3 DISCARDING & ENVIRONMENT
At the end of the life of the appliance, please dispose
of the appliance according to the regulations and
guidelines applicable at the time. Throw packing materials like plastic and boxes in the
appropriate containers.
2. FOREWORD
This appliance (machine) has been designed by our
technical staff and produced in our factory with
decades of experience and the greatest care in or-
der to achieve the very highest quality standards.
Our ISO 9001 certifi ed quality system allows us to
keep all company processes under control, to en-
sure continuous improvement of the quality and
safety of our products.
Read this manual immediately; it will help you to
get to know your machine better. If installed and
used correctly, in accordance with the instructions,
your machine will not present any risks or hazards
for the user. It is important always to follow the instructions in
this manual.
The user must never access the compressor - con-
denser compartment or tamper with the control
and safety devices in any way.
Read our recommendations for correct use and
optimum application of your ice-making machine
and it will give you troublefree service over a long
working life.
Please always state the model and serial number
of your appliance in all communications with the
manufacturer or our representative.
3. OPERATION
Implement the following operations before activat-
ing the ice maker:
1. Verify that the ice maker has not been damaged
during transport.
2. Remove all the material provided from the con-
tainer: supply pipe, drain pipe, documentation
and any accessories.
3. Clean inside the container with a sponge damp-
ened with warm water and a little sodium bicar-
bonate; rinse with clean water and dry carefully.
4.Place the ice maker in its defi nite location and
ensure that it is perfectly level (fi g. 1).
Fig. 1