M
A I N T E N A N C E
A
N D
S
E R V I C E
6–5
C
AULKING
/G
ASKET
Deck fittings, bow rails, windows, hatches, etc. have been caulked or gasketed with the
highest quality material to ensure a waterproof joint with the boat. However, the working action
of normal use will tend to flex the joint and eventually break down the seal. Periodically inspect
the caulking or gaskets for leaks. Recaulk or replace the gaskets when necessary, or have your
dealer do the repairs.
S
TAINLESS
S
TEEL
R
AILS
& H
ARDWARE
Your hardware is made of laboratory grade 316 stainless steel and needs regular cleaning to
maintain its “less staining” properties. The key to maintaining stainless steel is to keep it clean
with a mild solution of soap and fresh water. Remove salt or dirt from your stainless steel on a
regular basis.
F
UEL
S
YSTEM
M
AINTENANCE
To determine whether a fuel flow problem is in your fuel system or your engine, follow this
simple method. Connect a six-gallon portable tank to the engine and operate the engine. If the
problem persists, the likely cause is with the engine itself. If the problem goes away, the source
must be in the boat’s fuel system. One component that should be inspected if a restriction occurs
is the anti-siphon valve. If fuel does not flow properly through this part, it must be cleaned and/or
replaced.
DO NOT
remove the anti-siphon valve and replace it with a regular barb.
Do not use fuels containing alcohol. Alcohol, particularly methanol, will absorb water making
fuel more corrosive to metals in tanks and carburetors. It also shortens the durability of elastomers
such as hose and gaskets.
After fueling, inspect the fuel hoses, connections, and tanks for tightness, signs of leaks, and
deterioration. Annually conduct a more detailed inspection of fuel system components, especially
those hidden from routine inspection. Replace any fittings, deteriorated hoses, clamps or
connections immediately.
F
UEL
T
ANK
C
OMPARTMENT
The fuel tank compartments need to be rinsed periodically especially when used in a salt-
water environment. Dirt accumulation attracts salt that creates salt crystals. Salt crystals can
corrode most metal surfaces if left untreated over a period of time. Rinse the compartment with
FRESH
water to help protect your fuel tank from rust and corrosion. Remove the access plates
from fuel tank lids and inspect this area for leaks or unsecured lines.
The access plates on your fuel compartment lid seal this area. Over time the opening and
closing of these plates cause the o-rings to wear-out. Replace these o-rings as necessary to
maintain the watertight integrity of the plates.
S
HOWER
S
UMP
A shower in the head compartment drains into a contained “sump” which is used to prevent
hair, soap scum, and bacteria from accumulating in the bilge and creating odors. This sump
should be cleaned regularly. The sump pump box contains a filter; remove the filter and rinse with
water to clean. The filter should always be installed when using the shower to prevent the sump
pump from becoming clogged.