manualshive.com logo in svg

Grady-White Boats Canyon 456, Manual, Page: 26 / 90

Share
Download
Grady-White Boats Canyon 456 Manual Download Page 26

3-6

Chapter 3: General Information

General Information On Boat Handling

The best method of learning how to handle and obtain the best performance from your boat is 

to practice and experiment. After several hours of operation, you should experiment with the 
throttle settings to discover the setting that will be the most comfortable and economical range for 
your particular load conditions.

Other conditions you may want to determine could include the following:

•  Minimum speed for effective steering.
•  Turning radius at different speeds.
•  Response to steering at low speeds.
•  Accelerating and deceleration rates.
•  Time and distance to bring the boat to a stop at different speeds.
•  Control of the boat in close quarters.
•  Time required to bring the boat on plane.

Also read the section in Sportfish, Cruisers, Yachts Owner’s Manual beginning on page 59 for 

information on safe operating speed.

Summary of Contents for Canyon 456



























































































Reviews:

No comments